Castor Diameter | 125mm |
---|---|
Width of Thread | 25mm |
Offset | 41mm |
Castor Heigth | 160mm |
Swivel Radius | 131mm |
Standard | EN 12530 |
Castor Bearing | Precision Ball Bearing |
Castor Material | Polypropyleen |
Mounting method | Bolt Hole 12mm |
Hardness of Thread | Shore A 87 |
Ambient Temperature | – 20 / + 60°C |
Castor Load | 100kg |
Suited For | Hospital Beds, Hospital Equipment, Patient Hoists, Skip Chairs |
Suited for Patient Hoist(s): | Minstrel Double, Minstrel Single, Sara 3000 |
Suited for Skip Chair | N/A |
Rear Braked Castor for Sara 3000 TGGE.311 Replacement
$150.00
Castor total lock 125mm Bolt Hole
- Diameter of 125mm and a Thread width of 32mm, using non marking thermoplastic rubber
- Equipped with 12mm bolt hole, for mounting with any bolt and nut
- Original Spare Part
- Zinc plated housing, made of pressed steel for a durable product
- Maintenance free and with total lock function
6 in stock (also available on backorder)
Product Description
Castor total lock 125mm with Bolt Hole
This 125mm castor is designed to fit in numerous applications such as hospital beds, patient hoists and skip chairs.
It is fitted with a total lock mechanism and its housing is made of bright zinc plated pressed steel. Thanks to a swivel head with double ball bearings, the castor changes direction very easily and with hardly any effort. This castor has a load capacity of 100kg (200kg static load).
The housing is connected to the wheel axle with bolt and nut and the wheel itself can be mounted using a bolt of any length that fits through the 12mm hole.
The wheel centre is made of polypropylene and the thread of thermoplastic rubber, causing the castor to leave no marks behind on the floor.
A precision ball bearing is used to let the castor roll smoothly and effortless, even after substantial use.
A complete overview of the compatible applications can be found under “Additional Info”.
You’ll find the datasheet of this castpr the tab “Documentation”.
Features
- Diameter of 125mm and a Thread width of 32mm, using non marking thermoplastic rubber
- Equipped with 12mm bolt hole, for mounting with any bolt and nut
- Original Spare Part
- Zinc plated housing, made of pressed steel for a durable product
- Maintenance free and with total lock function
Choose Medical Spare Parts, Choose Quality and Durability
Additional Information
Weight | 1.5 kg |
---|---|
Dimensions | 7.62 x 12.7 x 2.54 cm |
Reviews
There are no reviews yet.